Ordnance Datum
The term ‘Ordnance Datum’ refers to the height of mean sea-level, taken from a reference point at Newlyn in Cornwall. This is basis of the national height system for Britain.
The Newlyn Ordnance Datum was preceded by a Liverpool levelling, started in 1840 using a bench mark on St John's Church. In 1844 the datum was changed to the tidal pole in Victoria Dock, but from 1921, this has been generally superseded by the Newlyn Ordnance Datum.
In some remote islands such as Shetland and the Hebrides, datums are based on a local determination of mean sea level.
Ref https://www.ordnancesurvey.co.uk/gps/legacy-control-information/liverpool-to-newlyn
The term Above Ordnance Datum (AOD) refers to a height above the Ordnance Datum. Measurements are given a + or a – sign to signify which side of Ordnance Datum it falls.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Minimum energy efficiency standards (MEES)
CIAT briefing on response to consultations for privately rented non-domestic properties.
Connect, collaborate, shape the future
Registration now live for UK Construction Week Birmingham.
CIOB announces Saul Humphrey FCIOB as new President for 26/27 term.
A quick, simple, and zero-bills solution to prevent overheating.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Your views needed - a strategy for the professions, trades and occupations.